Vandoren Boehm Bb clarinet B40D
VANDOREN Boehm Bb clarinet B40D
With the B40D Vandoren clarinet mouthpiece, Vandoren creates a completely new possibility. The B40D mouthpiece has an opening for Boehm clarinets, but the tenon for clarinets with the German system. This is the result of many suggestions from music teachers and students. Many schools teach with the German system and students find it easier to produce a tone due to the larger bore of the Boehm clarinets. This was incentive enough for Vandoren to take action in this respect, and the B40D clarinet mouthpiece was the perfect solution. The demand and, above all, the consistently positive feedback from clarinettists show that Vandoren has taken the right path with this B40D mouthpiece. - When choosing the reeds, you should go for the Vandoren 56 Rue Lepic 2.5 gauge to achieve a beautiful and compact tone on the clarinet right from the start.
The features of the VANDOREN clarinet mouthpiece B40D:
- black ebonite
- Bore opening for Boehm clarinet
- Tenon for German clarinet system
- 119.5 Bore opening (1/100mm)
- Bore length: ML = medium long
- recommended reeds: Rue Lepic = 2.5 / 3 / 3.5
Interesting facts about the production of Vandoren mouthpieces:
The mouthpiece construction begins with a blank made of ebonite, an extremely hard material obtained from natural rubber. The mouthpiece is then given its outer shape in an automatic lathe specially developed for Vandoren. During this process, it is particularly important to locate the exact center of the mouthpiece. After each production step, the appearance and dimensions of each individual model are subjected to a precise check. The mouthpieces are polished until they have a shiny surface. The corresponding track is then ground. All the mouthpieces are now sorted into groups and covered with cork. Only the highest quality cork is used here,
to ensure durability and precision. The final adjustment of the track is carried out step by step using diamond cutting tools. The tolerances of 1/100 mm are so low that the track does not need to be polished. The final machining of the mouthpiece as well as the chamber, bore and web tip is done by hand. Specialists put the finishing touches to the mouthpiece so that it can withstand the critical scrutiny of professional musicians. The mouthpieces are then polished one last time, with the exception of the track, to remove stains and blemishes. In the final step, the golden Vandoren stamp is embossed next to the model number. Professional musicians then test the quality, sound and pitch of the mouthpieces. After a final check, the mouthpieces are packaged and sent all over the world.
This text has been automatically translated and may contain errors.
| Safety and warning information | Die für das Produkt geltenden Sicherheits- und Warnhinweise sind in der Bedienungsanleitung des Produkts aufgeführt. |
|---|---|
| manufacturer information | Stölzel Arnold GmbH Rostocker Straße 18-20 65191 Wiesbaden GERMANY info@stoelzel-music.de |
VANDOREN Boehm Bb clarinet B40D
With the B40D Vandoren clarinet mouthpiece, Vandoren creates a completely new possibility. The B40D mouthpiece has an opening for Boehm clarinets, but the tenon for clarinets with the German system. This is the result of many suggestions from music teachers and students. Many schools teach with the German system and students find it easier to produce a tone due to the larger bore of the Boehm clarinets. This was incentive enough for Vandoren to take action in this respect, and the B40D clarinet mouthpiece was the perfect solution. The demand and, above all, the consistently positive feedback from clarinettists show that Vandoren has taken the right path with this B40D mouthpiece. - When choosing the reeds, you should go for the Vandoren 56 Rue Lepic 2.5 gauge to achieve a beautiful and compact tone on the clarinet right from the start.
The features of the VANDOREN clarinet mouthpiece B40D:
- black ebonite
- Bore opening for Boehm clarinet
- Tenon for German clarinet system
- 119.5 Bore opening (1/100mm)
- Bore length: ML = medium long
- recommended reeds: Rue Lepic = 2.5 / 3 / 3.5
Interesting facts about the production of Vandoren mouthpieces:
The mouthpiece construction begins with a blank made of ebonite, an extremely hard material obtained from natural rubber. The mouthpiece is then given its outer shape in an automatic lathe specially developed for Vandoren. During this process, it is particularly important to locate the exact center of the mouthpiece. After each production step, the appearance and dimensions of each individual model are subjected to a precise check. The mouthpieces are polished until they have a shiny surface. The corresponding track is then ground. All the mouthpieces are now sorted into groups and covered with cork. Only the highest quality cork is used here,
to ensure durability and precision. The final adjustment of the track is carried out step by step using diamond cutting tools. The tolerances of 1/100 mm are so low that the track does not need to be polished. The final machining of the mouthpiece as well as the chamber, bore and web tip is done by hand. Specialists put the finishing touches to the mouthpiece so that it can withstand the critical scrutiny of professional musicians. The mouthpieces are then polished one last time, with the exception of the track, to remove stains and blemishes. In the final step, the golden Vandoren stamp is embossed next to the model number. Professional musicians then test the quality, sound and pitch of the mouthpieces. After a final check, the mouthpieces are packaged and sent all over the world.
This text has been automatically translated and may contain errors.
VANDOREN Boehm Bb clarinet B40D
With the B40D Vandoren clarinet mouthpiece, Vandoren creates a completely new possibility. The B40D mouthpiece has an opening for Boehm clarinets, but the tenon for clarinets with the German system. This is the result of many suggestions from music teachers and students. Many schools teach with the German system and students find it easier to produce a tone due to the larger bore of the Boehm clarinets. This was incentive enough for Vandoren to take action in this respect, and the B40D clarinet mouthpiece was the perfect solution. The demand and, above all, the consistently positive feedback from clarinettists show that Vandoren has taken the right path with this B40D mouthpiece. - When choosing the reeds, you should go for the Vandoren 56 Rue Lepic 2.5 gauge to achieve a beautiful and compact tone on the clarinet right from the start.
The features of the VANDOREN clarinet mouthpiece B40D:
- black ebonite
- Bore opening for Boehm clarinet
- Tenon for German clarinet system
- 119.5 Bore opening (1/100mm)
- Bore length: ML = medium long
- recommended reeds: Rue Lepic = 2.5 / 3 / 3.5
Interesting facts about the production of Vandoren mouthpieces:
The mouthpiece construction begins with a blank made of ebonite, an extremely hard material obtained from natural rubber. The mouthpiece is then given its outer shape in an automatic lathe specially developed for Vandoren. During this process, it is particularly important to locate the exact center of the mouthpiece. After each production step, the appearance and dimensions of each individual model are subjected to a precise check. The mouthpieces are polished until they have a shiny surface. The corresponding track is then ground. All the mouthpieces are now sorted into groups and covered with cork. Only the highest quality cork is used here,
to ensure durability and precision. The final adjustment of the track is carried out step by step using diamond cutting tools. The tolerances of 1/100 mm are so low that the track does not need to be polished. The final machining of the mouthpiece as well as the chamber, bore and web tip is done by hand. Specialists put the finishing touches to the mouthpiece so that it can withstand the critical scrutiny of professional musicians. The mouthpieces are then polished one last time, with the exception of the track, to remove stains and blemishes. In the final step, the golden Vandoren stamp is embossed next to the model number. Professional musicians then test the quality, sound and pitch of the mouthpieces. After a final check, the mouthpieces are packaged and sent all over the world.
This text has been automatically translated and may contain errors.
| Safety and warning information | Die für das Produkt geltenden Sicherheits- und Warnhinweise sind in der Bedienungsanleitung des Produkts aufgeführt. |
|---|---|
| manufacturer information | Stölzel Arnold GmbH Rostocker Straße 18-20 65191 Wiesbaden GERMANY info@stoelzel-music.de |
VANDOREN Boehm Bb clarinet B40D
With the B40D Vandoren clarinet mouthpiece, Vandoren creates a completely new possibility. The B40D mouthpiece has an opening for Boehm clarinets, but the tenon for clarinets with the German system. This is the result of many suggestions from music teachers and students. Many schools teach with the German system and students find it easier to produce a tone due to the larger bore of the Boehm clarinets. This was incentive enough for Vandoren to take action in this respect, and the B40D clarinet mouthpiece was the perfect solution. The demand and, above all, the consistently positive feedback from clarinettists show that Vandoren has taken the right path with this B40D mouthpiece. - When choosing the reeds, you should go for the Vandoren 56 Rue Lepic 2.5 gauge to achieve a beautiful and compact tone on the clarinet right from the start.
The features of the VANDOREN clarinet mouthpiece B40D:
- black ebonite
- Bore opening for Boehm clarinet
- Tenon for German clarinet system
- 119.5 Bore opening (1/100mm)
- Bore length: ML = medium long
- recommended reeds: Rue Lepic = 2.5 / 3 / 3.5
Interesting facts about the production of Vandoren mouthpieces:
The mouthpiece construction begins with a blank made of ebonite, an extremely hard material obtained from natural rubber. The mouthpiece is then given its outer shape in an automatic lathe specially developed for Vandoren. During this process, it is particularly important to locate the exact center of the mouthpiece. After each production step, the appearance and dimensions of each individual model are subjected to a precise check. The mouthpieces are polished until they have a shiny surface. The corresponding track is then ground. All the mouthpieces are now sorted into groups and covered with cork. Only the highest quality cork is used here,
to ensure durability and precision. The final adjustment of the track is carried out step by step using diamond cutting tools. The tolerances of 1/100 mm are so low that the track does not need to be polished. The final machining of the mouthpiece as well as the chamber, bore and web tip is done by hand. Specialists put the finishing touches to the mouthpiece so that it can withstand the critical scrutiny of professional musicians. The mouthpieces are then polished one last time, with the exception of the track, to remove stains and blemishes. In the final step, the golden Vandoren stamp is embossed next to the model number. Professional musicians then test the quality, sound and pitch of the mouthpieces. After a final check, the mouthpieces are packaged and sent all over the world.
This text has been automatically translated and may contain errors.
Product recommendations could not be loaded.