MXR TBM1

MXR Tom Morello Power 50 Overdrive
For more than 30 years, the key component of Tom Morello's raw, hard-hitting sound has been his amplifier setup. The MXR Power 50 Overdrive captures the sound and functionality of this setup for use with
any rig, whether you're using a simple combo amp or a high-end custom stack.
Authentic amplifier tones created from scratch.
The circuitry of the Power 50 Overdrive uses MOSFET technology to emulate the pre-amplification stages of Tom's amplifier. Tom relies solely on his amp for his signature distortion tones, and when you switch on the Power 50 Overdrive, you'll understand why. A whole range of controls that come directly from the amplifier. The Power 50 Overdrive is equipped with the same controls as Tom's amplifier and has gain, bass, middle, treble, volume and presence controls, so you can reproduce its exact settings or tune the sound to your own taste.
Right in the middle of the action.
Tom runs all his effects pedals through the FX loop of his amplifier to give his signal chain a unique timbre. The Power 50 Overdrive also replicates this function, so you can give your signal chain the same character. Its own effects loop taps into the raw signal cut-off point before the presence control and individual sound shaping at the output. The MXR Tom Morello Power 50 Overdrive faithfully recreates one of the most iconic guitar sounds of the modern rock'n'roll era. Tom used a half-stack to refine this sound, and now you can put it right on your pedalboard.
- Overdrive/ Preamp
- How it works: Analog
- Bypass: True Bypass
- Controls: Volume, Bass, Middle, Treble, Gain, Presence
- Connections: Inputs 1 x Jack, Outputs 1 x Jack, Effects loop (Send / Return)
- Requirement: 12mA
- Optional: 9V DC power adapter (center negative)
- Battery powered 1 x 9V battery (6LR61) not included
- Dimensions: H 4cm, W 12.2cm, D 9.2cm
This text has been automatically translated and may contain errors.
| Safety and warning information | Die für das Produkt geltenden Sicherheits- und Warnhinweise sind in der Bedienungsanleitung des Produkts aufgeführt. |
|---|---|
| manufacturer information | Algam Dach GmbH Dachauer Straße 114 80636 München GERMANY info@algam.de |
MXR Tom Morello Power 50 Overdrive
For more than 30 years, the key component of Tom Morello's raw, hard-hitting sound has been his amplifier setup. The MXR Power 50 Overdrive captures the sound and functionality of this setup for use with
any rig, whether you're using a simple combo amp or a high-end custom stack.
Authentic amplifier tones created from scratch.
The circuitry of the Power 50 Overdrive uses MOSFET technology to emulate the pre-amplification stages of Tom's amplifier. Tom relies solely on his amp for his signature distortion tones, and when you switch on the Power 50 Overdrive, you'll understand why. A whole range of controls that come directly from the amplifier. The Power 50 Overdrive is equipped with the same controls as Tom's amplifier and has gain, bass, middle, treble, volume and presence controls, so you can reproduce its exact settings or tune the sound to your own taste.
Right in the middle of the action.
Tom runs all his effects pedals through the FX loop of his amplifier to give his signal chain a unique timbre. The Power 50 Overdrive also replicates this function, so you can give your signal chain the same character. Its own effects loop taps into the raw signal cut-off point before the presence control and individual sound shaping at the output. The MXR Tom Morello Power 50 Overdrive faithfully recreates one of the most iconic guitar sounds of the modern rock'n'roll era. Tom used a half-stack to refine this sound, and now you can put it right on your pedalboard.
- Overdrive/ Preamp
- How it works: Analog
- Bypass: True Bypass
- Controls: Volume, Bass, Middle, Treble, Gain, Presence
- Connections: Inputs 1 x Jack, Outputs 1 x Jack, Effects loop (Send / Return)
- Requirement: 12mA
- Optional: 9V DC power adapter (center negative)
- Battery powered 1 x 9V battery (6LR61) not included
- Dimensions: H 4cm, W 12.2cm, D 9.2cm
This text has been automatically translated and may contain errors.
MXR Tom Morello Power 50 Overdrive
For more than 30 years, the key component of Tom Morello's raw, hard-hitting sound has been his amplifier setup. The MXR Power 50 Overdrive captures the sound and functionality of this setup for use with
any rig, whether you're using a simple combo amp or a high-end custom stack.
Authentic amplifier tones created from scratch.
The circuitry of the Power 50 Overdrive uses MOSFET technology to emulate the pre-amplification stages of Tom's amplifier. Tom relies solely on his amp for his signature distortion tones, and when you switch on the Power 50 Overdrive, you'll understand why. A whole range of controls that come directly from the amplifier. The Power 50 Overdrive is equipped with the same controls as Tom's amplifier and has gain, bass, middle, treble, volume and presence controls, so you can reproduce its exact settings or tune the sound to your own taste.
Right in the middle of the action.
Tom runs all his effects pedals through the FX loop of his amplifier to give his signal chain a unique timbre. The Power 50 Overdrive also replicates this function, so you can give your signal chain the same character. Its own effects loop taps into the raw signal cut-off point before the presence control and individual sound shaping at the output. The MXR Tom Morello Power 50 Overdrive faithfully recreates one of the most iconic guitar sounds of the modern rock'n'roll era. Tom used a half-stack to refine this sound, and now you can put it right on your pedalboard.
- Overdrive/ Preamp
- How it works: Analog
- Bypass: True Bypass
- Controls: Volume, Bass, Middle, Treble, Gain, Presence
- Connections: Inputs 1 x Jack, Outputs 1 x Jack, Effects loop (Send / Return)
- Requirement: 12mA
- Optional: 9V DC power adapter (center negative)
- Battery powered 1 x 9V battery (6LR61) not included
- Dimensions: H 4cm, W 12.2cm, D 9.2cm
This text has been automatically translated and may contain errors.
| Safety and warning information | Die für das Produkt geltenden Sicherheits- und Warnhinweise sind in der Bedienungsanleitung des Produkts aufgeführt. |
|---|---|
| manufacturer information | Algam Dach GmbH Dachauer Straße 114 80636 München GERMANY info@algam.de |
MXR Tom Morello Power 50 Overdrive
For more than 30 years, the key component of Tom Morello's raw, hard-hitting sound has been his amplifier setup. The MXR Power 50 Overdrive captures the sound and functionality of this setup for use with
any rig, whether you're using a simple combo amp or a high-end custom stack.
Authentic amplifier tones created from scratch.
The circuitry of the Power 50 Overdrive uses MOSFET technology to emulate the pre-amplification stages of Tom's amplifier. Tom relies solely on his amp for his signature distortion tones, and when you switch on the Power 50 Overdrive, you'll understand why. A whole range of controls that come directly from the amplifier. The Power 50 Overdrive is equipped with the same controls as Tom's amplifier and has gain, bass, middle, treble, volume and presence controls, so you can reproduce its exact settings or tune the sound to your own taste.
Right in the middle of the action.
Tom runs all his effects pedals through the FX loop of his amplifier to give his signal chain a unique timbre. The Power 50 Overdrive also replicates this function, so you can give your signal chain the same character. Its own effects loop taps into the raw signal cut-off point before the presence control and individual sound shaping at the output. The MXR Tom Morello Power 50 Overdrive faithfully recreates one of the most iconic guitar sounds of the modern rock'n'roll era. Tom used a half-stack to refine this sound, and now you can put it right on your pedalboard.
- Overdrive/ Preamp
- How it works: Analog
- Bypass: True Bypass
- Controls: Volume, Bass, Middle, Treble, Gain, Presence
- Connections: Inputs 1 x Jack, Outputs 1 x Jack, Effects loop (Send / Return)
- Requirement: 12mA
- Optional: 9V DC power adapter (center negative)
- Battery powered 1 x 9V battery (6LR61) not included
- Dimensions: H 4cm, W 12.2cm, D 9.2cm
This text has been automatically translated and may contain errors.
Product recommendations could not be loaded.
