Lehle Professional Stereo XLR TRS
LEHLE - P-ISO TRS XLR STEREO - Passive Signal Isolator
The LEHLE P-ISO TRS XLR STEREO gets you ready for the mix. It not only converts your stereo audio signal to balanced XLR, but also isolates the ground, eliminating any possibility of unwanted noise or humming loops. Perfect for your pedalboard, modeler, or amp simulation in studios, clubs, bars, or stadiums—all packed into a compact size. The combination of passive isolation and maximum signal fidelity is only possible thanks to the core, consisting of two LEHLE TRANSFORMER HZ, which galvanically isolate the signal. Although designed for use with high-impedance signals, they also handle low-impedance signals with the same uncompromising sound quality. The high coupling and neutral frequency response ensure you won’t miss a single detail in your signal. The classic application of the LEHLE P-ISO TRS XLR STEREO is as a link between your stereo equipment and the professional world of mixing consoles, FOH, and DAW recording systems. It isolates the ground between these two worlds, ensuring that the devices are galvanically isolated and making hum or unwanted noise caused by a ground loop a thing of the past. Balanced signals at the two male XLR jacks on the Neutrik bring you even closer to the mixing console while keeping your signal protected, using standard XLR cables. Not only are stereo effects, digital modelers, and amp simulations possible, but keyboards, synthesizers, playback systems, and audio interfaces are also safe in the hands of the LEHLE P-ISO TRS XLR STEREO.
- Stereo Isolator
- Hum-free and lossless isolation
- Two high-impedance LEHLE TRANSFORMER HZ
- Ground switch (Ground Lift)
- Can be used in unbalanced or balanced mode
- Passive requires no power supply
- Input: 2x 6.3 mm TRS jack
- Output: 2x XLR
- Made in Germany
This text was automatically translated and may contain errors.
| Safety and warning information | Die für das Produkt geltenden Sicherheits- und Warnhinweise sind in der Bedienungsanleitung des Produkts aufgeführt. |
|---|---|
| manufacturer information | Lehle Gitarrentechnik Im Hundsbusch 11 46562 Voerde GERMANY support@lehle.com |
LEHLE - P-ISO TRS XLR STEREO - Passive Signal Isolator
The LEHLE P-ISO TRS XLR STEREO gets you ready for the mix. It not only converts your stereo audio signal to balanced XLR, but also isolates the ground, eliminating any possibility of unwanted noise or humming loops. Perfect for your pedalboard, modeler, or amp simulation in studios, clubs, bars, or stadiums—all packed into a compact size. The combination of passive isolation and maximum signal fidelity is only possible thanks to the core, consisting of two LEHLE TRANSFORMER HZ, which galvanically isolate the signal. Although designed for use with high-impedance signals, they also handle low-impedance signals with the same uncompromising sound quality. The high coupling and neutral frequency response ensure you won’t miss a single detail in your signal. The classic application of the LEHLE P-ISO TRS XLR STEREO is as a link between your stereo equipment and the professional world of mixing consoles, FOH, and DAW recording systems. It isolates the ground between these two worlds, ensuring that the devices are galvanically isolated and making hum or unwanted noise caused by a ground loop a thing of the past. Balanced signals at the two male XLR jacks on the Neutrik bring you even closer to the mixing console while keeping your signal protected, using standard XLR cables. Not only are stereo effects, digital modelers, and amp simulations possible, but keyboards, synthesizers, playback systems, and audio interfaces are also safe in the hands of the LEHLE P-ISO TRS XLR STEREO.
- Stereo Isolator
- Hum-free and lossless isolation
- Two high-impedance LEHLE TRANSFORMER HZ
- Ground switch (Ground Lift)
- Can be used in unbalanced or balanced mode
- Passive requires no power supply
- Input: 2x 6.3 mm TRS jack
- Output: 2x XLR
- Made in Germany
This text was automatically translated and may contain errors.
LEHLE - P-ISO TRS XLR STEREO - Passive Signal Isolator
The LEHLE P-ISO TRS XLR STEREO gets you ready for the mix. It not only converts your stereo audio signal to balanced XLR, but also isolates the ground, eliminating any possibility of unwanted noise or humming loops. Perfect for your pedalboard, modeler, or amp simulation in studios, clubs, bars, or stadiums—all packed into a compact size. The combination of passive isolation and maximum signal fidelity is only possible thanks to the core, consisting of two LEHLE TRANSFORMER HZ, which galvanically isolate the signal. Although designed for use with high-impedance signals, they also handle low-impedance signals with the same uncompromising sound quality. The high coupling and neutral frequency response ensure you won’t miss a single detail in your signal. The classic application of the LEHLE P-ISO TRS XLR STEREO is as a link between your stereo equipment and the professional world of mixing consoles, FOH, and DAW recording systems. It isolates the ground between these two worlds, ensuring that the devices are galvanically isolated and making hum or unwanted noise caused by a ground loop a thing of the past. Balanced signals at the two male XLR jacks on the Neutrik bring you even closer to the mixing console while keeping your signal protected, using standard XLR cables. Not only are stereo effects, digital modelers, and amp simulations possible, but keyboards, synthesizers, playback systems, and audio interfaces are also safe in the hands of the LEHLE P-ISO TRS XLR STEREO.
- Stereo Isolator
- Hum-free and lossless isolation
- Two high-impedance LEHLE TRANSFORMER HZ
- Ground switch (Ground Lift)
- Can be used in unbalanced or balanced mode
- Passive requires no power supply
- Input: 2x 6.3 mm TRS jack
- Output: 2x XLR
- Made in Germany
This text was automatically translated and may contain errors.
| Safety and warning information | Die für das Produkt geltenden Sicherheits- und Warnhinweise sind in der Bedienungsanleitung des Produkts aufgeführt. |
|---|---|
| manufacturer information | Lehle Gitarrentechnik Im Hundsbusch 11 46562 Voerde GERMANY support@lehle.com |
LEHLE - P-ISO TRS XLR STEREO - Passive Signal Isolator
The LEHLE P-ISO TRS XLR STEREO gets you ready for the mix. It not only converts your stereo audio signal to balanced XLR, but also isolates the ground, eliminating any possibility of unwanted noise or humming loops. Perfect for your pedalboard, modeler, or amp simulation in studios, clubs, bars, or stadiums—all packed into a compact size. The combination of passive isolation and maximum signal fidelity is only possible thanks to the core, consisting of two LEHLE TRANSFORMER HZ, which galvanically isolate the signal. Although designed for use with high-impedance signals, they also handle low-impedance signals with the same uncompromising sound quality. The high coupling and neutral frequency response ensure you won’t miss a single detail in your signal. The classic application of the LEHLE P-ISO TRS XLR STEREO is as a link between your stereo equipment and the professional world of mixing consoles, FOH, and DAW recording systems. It isolates the ground between these two worlds, ensuring that the devices are galvanically isolated and making hum or unwanted noise caused by a ground loop a thing of the past. Balanced signals at the two male XLR jacks on the Neutrik bring you even closer to the mixing console while keeping your signal protected, using standard XLR cables. Not only are stereo effects, digital modelers, and amp simulations possible, but keyboards, synthesizers, playback systems, and audio interfaces are also safe in the hands of the LEHLE P-ISO TRS XLR STEREO.
- Stereo Isolator
- Hum-free and lossless isolation
- Two high-impedance LEHLE TRANSFORMER HZ
- Ground switch (Ground Lift)
- Can be used in unbalanced or balanced mode
- Passive requires no power supply
- Input: 2x 6.3 mm TRS jack
- Output: 2x XLR
- Made in Germany
This text was automatically translated and may contain errors.
Product recommendations could not be loaded.