Lehle Mono Volume
Lehle Mono Volume
The Lehle Mono Volume is a wear-free volume pedal that is equipped with a very precise magnetic sensor. This sensor uses the Hall effect, named after Edwin Hall, to measure the strength of magnetic fields. With the Lehle Mono Volume, the German-made Hall sensor is precisely calibrated to the built-in magnet and the pedal's control travel. The pedal only moves the magnet; its distance is measured by the reverb sensor, which then controls a VCA.
The high-quality Blackmer VCA (= Voltage Controlled Amplifier) from the USA replaces the mechanical potentiometer here. The principle of voltage-controlled amplifiers is based on the fact that the amplification is varied by the control voltage coming from the Hall sensor. This method enables much more precise operation than the usual mechanical potentiometers or optical sensors of conventional volume pedals, and also eliminates the noise typical of potentiometers and the cumbersome adjustment process. The Lehle Mono Volume transmits the full sound spectrum of the connected instrument over the entire control range. The input and output impedance always remains the same, so there is no high-frequency attenuation as with a potentiometer. Internally, the input voltage of the pedal is rectified, filtered, stabilized and then doubled to 18 volts behind the power supply socket. This makes it very level-resistant and achieves an overall dynamic range of 110 dB.
The volume control of the Lehle Mono Volume ranges from -92 dB to 0 dB - i.e. from practically silent to equally loud. A gain of approx. +10 dB can be set with a potentiometer.
The Lehle Mono Volume runs mechanically extremely smoothly and evenly, as it is equipped with low-friction plain bearings made of a high-performance polymer and there is no mechanical transmission of the pedal to other components. The pedal's smoothness can be adjusted very precisely using an adjusting screw.
In addition, the Lehle Mono Volume has a buffered direct out. Everything from tuner, DAW to second amp can be supplied here without affecting the sound.
Specs
- Wear-free due to precision magnetic sensor
- Without mechanical potentiometer
- From -92db to 0db or +12db boost
- No high-frequency attenuation
- No sound lossTotal dynamic range of 110db due to Vlackmer VCA
- Buffered direct out for tuner or additional amplifier
This text has been automatically translated and may contain errors.
| Safety and warning information | Die für das Produkt geltenden Sicherheits- und Warnhinweise sind in der Bedienungsanleitung des Produkts aufgeführt. |
|---|---|
| manufacturer information | Lehle Gitarrentechnik Im Hundsbusch 11 46562 Voerde GERMANY support@lehle.com |
Lehle Mono Volume
The Lehle Mono Volume is a wear-free volume pedal that is equipped with a very precise magnetic sensor. This sensor uses the Hall effect, named after Edwin Hall, to measure the strength of magnetic fields. With the Lehle Mono Volume, the German-made Hall sensor is precisely calibrated to the built-in magnet and the pedal's control travel. The pedal only moves the magnet; its distance is measured by the reverb sensor, which then controls a VCA.
The high-quality Blackmer VCA (= Voltage Controlled Amplifier) from the USA replaces the mechanical potentiometer here. The principle of voltage-controlled amplifiers is based on the fact that the amplification is varied by the control voltage coming from the Hall sensor. This method enables much more precise operation than the usual mechanical potentiometers or optical sensors of conventional volume pedals, and also eliminates the noise typical of potentiometers and the cumbersome adjustment process. The Lehle Mono Volume transmits the full sound spectrum of the connected instrument over the entire control range. The input and output impedance always remains the same, so there is no high-frequency attenuation as with a potentiometer. Internally, the input voltage of the pedal is rectified, filtered, stabilized and then doubled to 18 volts behind the power supply socket. This makes it very level-resistant and achieves an overall dynamic range of 110 dB.
The volume control of the Lehle Mono Volume ranges from -92 dB to 0 dB - i.e. from practically silent to equally loud. A gain of approx. +10 dB can be set with a potentiometer.
The Lehle Mono Volume runs mechanically extremely smoothly and evenly, as it is equipped with low-friction plain bearings made of a high-performance polymer and there is no mechanical transmission of the pedal to other components. The pedal's smoothness can be adjusted very precisely using an adjusting screw.
In addition, the Lehle Mono Volume has a buffered direct out. Everything from tuner, DAW to second amp can be supplied here without affecting the sound.
Specs
- Wear-free due to precision magnetic sensor
- Without mechanical potentiometer
- From -92db to 0db or +12db boost
- No high-frequency attenuation
- No sound lossTotal dynamic range of 110db due to Vlackmer VCA
- Buffered direct out for tuner or additional amplifier
This text has been automatically translated and may contain errors.
Lehle Mono Volume
The Lehle Mono Volume is a wear-free volume pedal that is equipped with a very precise magnetic sensor. This sensor uses the Hall effect, named after Edwin Hall, to measure the strength of magnetic fields. With the Lehle Mono Volume, the German-made Hall sensor is precisely calibrated to the built-in magnet and the pedal's control travel. The pedal only moves the magnet; its distance is measured by the reverb sensor, which then controls a VCA.
The high-quality Blackmer VCA (= Voltage Controlled Amplifier) from the USA replaces the mechanical potentiometer here. The principle of voltage-controlled amplifiers is based on the fact that the amplification is varied by the control voltage coming from the Hall sensor. This method enables much more precise operation than the usual mechanical potentiometers or optical sensors of conventional volume pedals, and also eliminates the noise typical of potentiometers and the cumbersome adjustment process. The Lehle Mono Volume transmits the full sound spectrum of the connected instrument over the entire control range. The input and output impedance always remains the same, so there is no high-frequency attenuation as with a potentiometer. Internally, the input voltage of the pedal is rectified, filtered, stabilized and then doubled to 18 volts behind the power supply socket. This makes it very level-resistant and achieves an overall dynamic range of 110 dB.
The volume control of the Lehle Mono Volume ranges from -92 dB to 0 dB - i.e. from practically silent to equally loud. A gain of approx. +10 dB can be set with a potentiometer.
The Lehle Mono Volume runs mechanically extremely smoothly and evenly, as it is equipped with low-friction plain bearings made of a high-performance polymer and there is no mechanical transmission of the pedal to other components. The pedal's smoothness can be adjusted very precisely using an adjusting screw.
In addition, the Lehle Mono Volume has a buffered direct out. Everything from tuner, DAW to second amp can be supplied here without affecting the sound.
Specs
- Wear-free due to precision magnetic sensor
- Without mechanical potentiometer
- From -92db to 0db or +12db boost
- No high-frequency attenuation
- No sound lossTotal dynamic range of 110db due to Vlackmer VCA
- Buffered direct out for tuner or additional amplifier
This text has been automatically translated and may contain errors.
| Safety and warning information | Die für das Produkt geltenden Sicherheits- und Warnhinweise sind in der Bedienungsanleitung des Produkts aufgeführt. |
|---|---|
| manufacturer information | Lehle Gitarrentechnik Im Hundsbusch 11 46562 Voerde GERMANY support@lehle.com |
Lehle Mono Volume
The Lehle Mono Volume is a wear-free volume pedal that is equipped with a very precise magnetic sensor. This sensor uses the Hall effect, named after Edwin Hall, to measure the strength of magnetic fields. With the Lehle Mono Volume, the German-made Hall sensor is precisely calibrated to the built-in magnet and the pedal's control travel. The pedal only moves the magnet; its distance is measured by the reverb sensor, which then controls a VCA.
The high-quality Blackmer VCA (= Voltage Controlled Amplifier) from the USA replaces the mechanical potentiometer here. The principle of voltage-controlled amplifiers is based on the fact that the amplification is varied by the control voltage coming from the Hall sensor. This method enables much more precise operation than the usual mechanical potentiometers or optical sensors of conventional volume pedals, and also eliminates the noise typical of potentiometers and the cumbersome adjustment process. The Lehle Mono Volume transmits the full sound spectrum of the connected instrument over the entire control range. The input and output impedance always remains the same, so there is no high-frequency attenuation as with a potentiometer. Internally, the input voltage of the pedal is rectified, filtered, stabilized and then doubled to 18 volts behind the power supply socket. This makes it very level-resistant and achieves an overall dynamic range of 110 dB.
The volume control of the Lehle Mono Volume ranges from -92 dB to 0 dB - i.e. from practically silent to equally loud. A gain of approx. +10 dB can be set with a potentiometer.
The Lehle Mono Volume runs mechanically extremely smoothly and evenly, as it is equipped with low-friction plain bearings made of a high-performance polymer and there is no mechanical transmission of the pedal to other components. The pedal's smoothness can be adjusted very precisely using an adjusting screw.
In addition, the Lehle Mono Volume has a buffered direct out. Everything from tuner, DAW to second amp can be supplied here without affecting the sound.
Specs
- Wear-free due to precision magnetic sensor
- Without mechanical potentiometer
- From -92db to 0db or +12db boost
- No high-frequency attenuation
- No sound lossTotal dynamic range of 110db due to Vlackmer VCA
- Buffered direct out for tuner or additional amplifier
This text has been automatically translated and may contain errors.
Product recommendations could not be loaded.