Keeley Creator

Keeley Loomer Fuzz Reverb
The Keeley Loomer is a wall-of-fuzz drenched in a barrage of reverb. The Loomer is a thrill machine and gives you waves of reverb in a way you've never heard before in stompbox format. There's also an accompanying fuzz with three fixed EQ settings - a flat setting, a traditional bass and treble-heavy scoop setting and a darker full mode with more mids and basses.
Keeleys new reverbs in the Loomer could come from the wet dreams of a shoegazer. Reverb is a super-long ambient wave with the ability to feed octaved regeneration into the feedback loop. More than shimmer - it's shimmer reverb taken to the heavens.
Reverse sets different delay times with the Decay control, which gives you a rhythmic reverse reverb modeled after the Yamaha SPX90 and Alesis Midiverb II. Not really a reverse reverb, the reverse reverb mode reads through a delay line at various points and increases the volume at the same time. The decay control lets you choose between 8 different decay ranges from 150-500 ms.
And now it gets really cool. The reverse mode also offers you an envelope-controlled vibrato. The Tone control in this mode is based on the Rhythm Tone control of a Jazzmaster, with a low-pass filter with a center frequency of 156.6 Hz. Hit it hard and you get a sound as if you were playing with the Trem Bar of a Jazzmaster or Jaguar. The Focus Reverb is a dense reverb with two parallel delays at 250 ms and 380 ms. Since all reverb modes can be completely set to wet with the blend pot, the Focus mode is very close in sound to the Yamaha FX500 patch.
- Fuzz and reverb effects pedal
- 3 reverb modes (focus/reverse/reverb)
- 3 Fuzz modes (Flat/Full/Scoop)
- True Bypass
- Fuzz section control for fuzz, filter and level
- Toggle switch for switching between the fuzz modes
- Mod section control for blend, decay, warmth and depth
- Toggle switch for switching between the reverb modes
- Order switch to change the order of the fuzz and mod section in the signal chain
- Mod Bypass footswitch
- Fuzz Bypass footswitch
- Status LEDs
- Metal housing
- 6.3 mm mono IN/OUT jacks
- 6.3 mm Expression input for controlling the depth
- Power supply with optional 9V DC power supply 2.1 mm x 5.5 mm barrel connector, polarity (-) inside
- Battery operation not supported
- Current consumption >75 mA
- Dimensions (L x W x H) 99 mm x 120 mm x 53 mm
- Weight 544 g
This text has been automatically translated and may contain errors.
| Safety and warning information | Die für das Produkt geltenden Sicherheits- und Warnhinweise sind in der Bedienungsanleitung des Produkts aufgeführt. |
|---|---|
| manufacturer information | Warwick GmbH & Co Music Equipment Gewerbepark 46 08258 Markneukirchen GERMANY info@warwick.de |
Keeley Loomer Fuzz Reverb
The Keeley Loomer is a wall-of-fuzz drenched in a barrage of reverb. The Loomer is a thrill machine and gives you waves of reverb in a way you've never heard before in stompbox format. There's also an accompanying fuzz with three fixed EQ settings - a flat setting, a traditional bass and treble-heavy scoop setting and a darker full mode with more mids and basses.
Keeleys new reverbs in the Loomer could come from the wet dreams of a shoegazer. Reverb is a super-long ambient wave with the ability to feed octaved regeneration into the feedback loop. More than shimmer - it's shimmer reverb taken to the heavens.
Reverse sets different delay times with the Decay control, which gives you a rhythmic reverse reverb modeled after the Yamaha SPX90 and Alesis Midiverb II. Not really a reverse reverb, the reverse reverb mode reads through a delay line at various points and increases the volume at the same time. The decay control lets you choose between 8 different decay ranges from 150-500 ms.
And now it gets really cool. The reverse mode also offers you an envelope-controlled vibrato. The Tone control in this mode is based on the Rhythm Tone control of a Jazzmaster, with a low-pass filter with a center frequency of 156.6 Hz. Hit it hard and you get a sound as if you were playing with the Trem Bar of a Jazzmaster or Jaguar. The Focus Reverb is a dense reverb with two parallel delays at 250 ms and 380 ms. Since all reverb modes can be completely set to wet with the blend pot, the Focus mode is very close in sound to the Yamaha FX500 patch.
- Fuzz and reverb effects pedal
- 3 reverb modes (focus/reverse/reverb)
- 3 Fuzz modes (Flat/Full/Scoop)
- True Bypass
- Fuzz section control for fuzz, filter and level
- Toggle switch for switching between the fuzz modes
- Mod section control for blend, decay, warmth and depth
- Toggle switch for switching between the reverb modes
- Order switch to change the order of the fuzz and mod section in the signal chain
- Mod Bypass footswitch
- Fuzz Bypass footswitch
- Status LEDs
- Metal housing
- 6.3 mm mono IN/OUT jacks
- 6.3 mm Expression input for controlling the depth
- Power supply with optional 9V DC power supply 2.1 mm x 5.5 mm barrel connector, polarity (-) inside
- Battery operation not supported
- Current consumption >75 mA
- Dimensions (L x W x H) 99 mm x 120 mm x 53 mm
- Weight 544 g
This text has been automatically translated and may contain errors.
Keeley Loomer Fuzz Reverb
The Keeley Loomer is a wall-of-fuzz drenched in a barrage of reverb. The Loomer is a thrill machine and gives you waves of reverb in a way you've never heard before in stompbox format. There's also an accompanying fuzz with three fixed EQ settings - a flat setting, a traditional bass and treble-heavy scoop setting and a darker full mode with more mids and basses.
Keeleys new reverbs in the Loomer could come from the wet dreams of a shoegazer. Reverb is a super-long ambient wave with the ability to feed octaved regeneration into the feedback loop. More than shimmer - it's shimmer reverb taken to the heavens.
Reverse sets different delay times with the Decay control, which gives you a rhythmic reverse reverb modeled after the Yamaha SPX90 and Alesis Midiverb II. Not really a reverse reverb, the reverse reverb mode reads through a delay line at various points and increases the volume at the same time. The decay control lets you choose between 8 different decay ranges from 150-500 ms.
And now it gets really cool. The reverse mode also offers you an envelope-controlled vibrato. The Tone control in this mode is based on the Rhythm Tone control of a Jazzmaster, with a low-pass filter with a center frequency of 156.6 Hz. Hit it hard and you get a sound as if you were playing with the Trem Bar of a Jazzmaster or Jaguar. The Focus Reverb is a dense reverb with two parallel delays at 250 ms and 380 ms. Since all reverb modes can be completely set to wet with the blend pot, the Focus mode is very close in sound to the Yamaha FX500 patch.
- Fuzz and reverb effects pedal
- 3 reverb modes (focus/reverse/reverb)
- 3 Fuzz modes (Flat/Full/Scoop)
- True Bypass
- Fuzz section control for fuzz, filter and level
- Toggle switch for switching between the fuzz modes
- Mod section control for blend, decay, warmth and depth
- Toggle switch for switching between the reverb modes
- Order switch to change the order of the fuzz and mod section in the signal chain
- Mod Bypass footswitch
- Fuzz Bypass footswitch
- Status LEDs
- Metal housing
- 6.3 mm mono IN/OUT jacks
- 6.3 mm Expression input for controlling the depth
- Power supply with optional 9V DC power supply 2.1 mm x 5.5 mm barrel connector, polarity (-) inside
- Battery operation not supported
- Current consumption >75 mA
- Dimensions (L x W x H) 99 mm x 120 mm x 53 mm
- Weight 544 g
This text has been automatically translated and may contain errors.
| Safety and warning information | Die für das Produkt geltenden Sicherheits- und Warnhinweise sind in der Bedienungsanleitung des Produkts aufgeführt. |
|---|---|
| manufacturer information | Warwick GmbH & Co Music Equipment Gewerbepark 46 08258 Markneukirchen GERMANY info@warwick.de |
Keeley Loomer Fuzz Reverb
The Keeley Loomer is a wall-of-fuzz drenched in a barrage of reverb. The Loomer is a thrill machine and gives you waves of reverb in a way you've never heard before in stompbox format. There's also an accompanying fuzz with three fixed EQ settings - a flat setting, a traditional bass and treble-heavy scoop setting and a darker full mode with more mids and basses.
Keeleys new reverbs in the Loomer could come from the wet dreams of a shoegazer. Reverb is a super-long ambient wave with the ability to feed octaved regeneration into the feedback loop. More than shimmer - it's shimmer reverb taken to the heavens.
Reverse sets different delay times with the Decay control, which gives you a rhythmic reverse reverb modeled after the Yamaha SPX90 and Alesis Midiverb II. Not really a reverse reverb, the reverse reverb mode reads through a delay line at various points and increases the volume at the same time. The decay control lets you choose between 8 different decay ranges from 150-500 ms.
And now it gets really cool. The reverse mode also offers you an envelope-controlled vibrato. The Tone control in this mode is based on the Rhythm Tone control of a Jazzmaster, with a low-pass filter with a center frequency of 156.6 Hz. Hit it hard and you get a sound as if you were playing with the Trem Bar of a Jazzmaster or Jaguar. The Focus Reverb is a dense reverb with two parallel delays at 250 ms and 380 ms. Since all reverb modes can be completely set to wet with the blend pot, the Focus mode is very close in sound to the Yamaha FX500 patch.
- Fuzz and reverb effects pedal
- 3 reverb modes (focus/reverse/reverb)
- 3 Fuzz modes (Flat/Full/Scoop)
- True Bypass
- Fuzz section control for fuzz, filter and level
- Toggle switch for switching between the fuzz modes
- Mod section control for blend, decay, warmth and depth
- Toggle switch for switching between the reverb modes
- Order switch to change the order of the fuzz and mod section in the signal chain
- Mod Bypass footswitch
- Fuzz Bypass footswitch
- Status LEDs
- Metal housing
- 6.3 mm mono IN/OUT jacks
- 6.3 mm Expression input for controlling the depth
- Power supply with optional 9V DC power supply 2.1 mm x 5.5 mm barrel connector, polarity (-) inside
- Battery operation not supported
- Current consumption >75 mA
- Dimensions (L x W x H) 99 mm x 120 mm x 53 mm
- Weight 544 g
This text has been automatically translated and may contain errors.
Product recommendations could not be loaded.

