JHS Pedals Overdrive Preamp
JHS Overdrive Preamp -250 Overdrive
The JHS Pedals Overdrive Preamp is a faithful reproduction of the first version ('Big Box V1') of DOD's most popular pedal, the Overdrive / Preamp (250). The control options are very simple: the level control determines the output of the circuit and offers a boost or cut of the signal depending on the setting. The level control has been modified (or corrected) compared to the original, which means that the version from JHS Pedals offers significantly more volume. The gain control controls the amplification within the overdrive section. Higher settings bring the op-amp and hard clipping into saturation and thus create stronger clipping and a rich drive sound. The slide switch is a special extension that was not available on the original DOD 250. When researching the first versions of the 250 pedal, JHS Pedals found a version that used a completely different clipping arrangement - so the decision was made to simply use both versions for the overdrive preamp so that musicians could discover the tonal variations for themselves. The JHS Pedals Overdrive Preamp offers more gain / grit and more basses and mids than the later versions of the DOD 250.
- Overdrive effect pedal
- faithful reproduction of the DOD Overdrive / Preamp (250) V1
- powerful, flexible pedal for shaping sounds
- can be used as a solo boost, always-on preamp, transparent overdrive or distortion
- two switchable clipping arrangements (Down for a rich, more distorted sound, Up for a more open, louder and clearer sound)
- True Bypass
- Control for Level, Gain
- Clipping Arrangement Slide switch
- Bypass footswitch
- Status LED
- Metal housing
- 6.3 mm mono jack input / output
- Power supply via optional 9-18V DC power supply, 2.1 mm x 5.5 mm barrel connector, polarity (-) inside
- Battery operation not supported
- Current consumption 5 mA
- Dimensions (L x W x H) 119 x 94 x 42 mm
- Weight approx. 450 g
- Made in USA
This text has been automatically translated and may contain errors.
| Safety and warning information | Die für das Produkt geltenden Sicherheits- und Warnhinweise sind in der Bedienungsanleitung des Produkts aufgeführt. |
|---|---|
| manufacturer information | Warwick GmbH & Co Music Equipment Gewerbepark 46 08258 Markneukirchen GERMANY info@warwick.de |
JHS Overdrive Preamp -250 Overdrive
The JHS Pedals Overdrive Preamp is a faithful reproduction of the first version ('Big Box V1') of DOD's most popular pedal, the Overdrive / Preamp (250). The control options are very simple: the level control determines the output of the circuit and offers a boost or cut of the signal depending on the setting. The level control has been modified (or corrected) compared to the original, which means that the version from JHS Pedals offers significantly more volume. The gain control controls the amplification within the overdrive section. Higher settings bring the op-amp and hard clipping into saturation and thus create stronger clipping and a rich drive sound. The slide switch is a special extension that was not available on the original DOD 250. When researching the first versions of the 250 pedal, JHS Pedals found a version that used a completely different clipping arrangement - so the decision was made to simply use both versions for the overdrive preamp so that musicians could discover the tonal variations for themselves. The JHS Pedals Overdrive Preamp offers more gain / grit and more basses and mids than the later versions of the DOD 250.
- Overdrive effect pedal
- faithful reproduction of the DOD Overdrive / Preamp (250) V1
- powerful, flexible pedal for shaping sounds
- can be used as a solo boost, always-on preamp, transparent overdrive or distortion
- two switchable clipping arrangements (Down for a rich, more distorted sound, Up for a more open, louder and clearer sound)
- True Bypass
- Control for Level, Gain
- Clipping Arrangement Slide switch
- Bypass footswitch
- Status LED
- Metal housing
- 6.3 mm mono jack input / output
- Power supply via optional 9-18V DC power supply, 2.1 mm x 5.5 mm barrel connector, polarity (-) inside
- Battery operation not supported
- Current consumption 5 mA
- Dimensions (L x W x H) 119 x 94 x 42 mm
- Weight approx. 450 g
- Made in USA
This text has been automatically translated and may contain errors.
JHS Overdrive Preamp -250 Overdrive
The JHS Pedals Overdrive Preamp is a faithful reproduction of the first version ('Big Box V1') of DOD's most popular pedal, the Overdrive / Preamp (250). The control options are very simple: the level control determines the output of the circuit and offers a boost or cut of the signal depending on the setting. The level control has been modified (or corrected) compared to the original, which means that the version from JHS Pedals offers significantly more volume. The gain control controls the amplification within the overdrive section. Higher settings bring the op-amp and hard clipping into saturation and thus create stronger clipping and a rich drive sound. The slide switch is a special extension that was not available on the original DOD 250. When researching the first versions of the 250 pedal, JHS Pedals found a version that used a completely different clipping arrangement - so the decision was made to simply use both versions for the overdrive preamp so that musicians could discover the tonal variations for themselves. The JHS Pedals Overdrive Preamp offers more gain / grit and more basses and mids than the later versions of the DOD 250.
- Overdrive effect pedal
- faithful reproduction of the DOD Overdrive / Preamp (250) V1
- powerful, flexible pedal for shaping sounds
- can be used as a solo boost, always-on preamp, transparent overdrive or distortion
- two switchable clipping arrangements (Down for a rich, more distorted sound, Up for a more open, louder and clearer sound)
- True Bypass
- Control for Level, Gain
- Clipping Arrangement Slide switch
- Bypass footswitch
- Status LED
- Metal housing
- 6.3 mm mono jack input / output
- Power supply via optional 9-18V DC power supply, 2.1 mm x 5.5 mm barrel connector, polarity (-) inside
- Battery operation not supported
- Current consumption 5 mA
- Dimensions (L x W x H) 119 x 94 x 42 mm
- Weight approx. 450 g
- Made in USA
This text has been automatically translated and may contain errors.
| Safety and warning information | Die für das Produkt geltenden Sicherheits- und Warnhinweise sind in der Bedienungsanleitung des Produkts aufgeführt. |
|---|---|
| manufacturer information | Warwick GmbH & Co Music Equipment Gewerbepark 46 08258 Markneukirchen GERMANY info@warwick.de |
JHS Overdrive Preamp -250 Overdrive
The JHS Pedals Overdrive Preamp is a faithful reproduction of the first version ('Big Box V1') of DOD's most popular pedal, the Overdrive / Preamp (250). The control options are very simple: the level control determines the output of the circuit and offers a boost or cut of the signal depending on the setting. The level control has been modified (or corrected) compared to the original, which means that the version from JHS Pedals offers significantly more volume. The gain control controls the amplification within the overdrive section. Higher settings bring the op-amp and hard clipping into saturation and thus create stronger clipping and a rich drive sound. The slide switch is a special extension that was not available on the original DOD 250. When researching the first versions of the 250 pedal, JHS Pedals found a version that used a completely different clipping arrangement - so the decision was made to simply use both versions for the overdrive preamp so that musicians could discover the tonal variations for themselves. The JHS Pedals Overdrive Preamp offers more gain / grit and more basses and mids than the later versions of the DOD 250.
- Overdrive effect pedal
- faithful reproduction of the DOD Overdrive / Preamp (250) V1
- powerful, flexible pedal for shaping sounds
- can be used as a solo boost, always-on preamp, transparent overdrive or distortion
- two switchable clipping arrangements (Down for a rich, more distorted sound, Up for a more open, louder and clearer sound)
- True Bypass
- Control for Level, Gain
- Clipping Arrangement Slide switch
- Bypass footswitch
- Status LED
- Metal housing
- 6.3 mm mono jack input / output
- Power supply via optional 9-18V DC power supply, 2.1 mm x 5.5 mm barrel connector, polarity (-) inside
- Battery operation not supported
- Current consumption 5 mA
- Dimensions (L x W x H) 119 x 94 x 42 mm
- Weight approx. 450 g
- Made in USA
This text has been automatically translated and may contain errors.
Product recommendations could not be loaded.