EarthQuaker Devices Tone Job V2
EarthQuaker Devices Tone Job V2 - EQ / Boost
The EQD Tone Job is a well-equipped tone enhancement tool with EQ and booster, suitable for guitar, bass, synthesizer and more. The Tone Job pedal is equipped with controls for level, treble, mid and bass, with treble, mid and bass working actively, each with a +-20dB control range. The Level control is located behind the EQ and can raise the level by up to five times. The EQD Tone Job is ideal for fine-tuning the sound at the end of an effects pedal chain, for example. The Tone Job V2 has a noiseless, relay-based soft-touch footswitch. Audio signals do not pass through if the device is not supplied with power.
- Equalizer and tone enhancer with booster
- Active 3-band EQ
- up to +-20 dB boost/cut per band
- boosts post-EQ level up to 5x the input signal
- completely analog design
- True Bypass
- Bass and treble response dependent on the Mid setting
- Controls for level treble (2 kHz shelf), bass (500 Hz shelf) and mid (1 kHz bell resonance filter)
- Bypass footswitch
- noiseless relay-based soft-touch switching
- Status LED
- Metal housing
- 6.3 mm mono jack input and output
- Power supply via 9V battery or optional 9V - 18V mains adapter 2.1 mm x 5.5 mm barrel connector, polarity (-) inside
- Dimensions (L x W x H): 117 mm x 64 mm x 57 mm
- Power consumption 10 mA
- Hand-made in the USA
This text has been automatically translated and may contain errors.
| Safety and warning information | Die für das Produkt geltenden Sicherheits- und Warnhinweise sind in der Bedienungsanleitung des Produkts aufgeführt. |
|---|---|
| manufacturer information | Warwick GmbH & Co Music Equipment Gewerbepark 46 08258 Markneukirchen GERMANY info@warwick.de |
EarthQuaker Devices Tone Job V2 - EQ / Boost
The EQD Tone Job is a well-equipped tone enhancement tool with EQ and booster, suitable for guitar, bass, synthesizer and more. The Tone Job pedal is equipped with controls for level, treble, mid and bass, with treble, mid and bass working actively, each with a +-20dB control range. The Level control is located behind the EQ and can raise the level by up to five times. The EQD Tone Job is ideal for fine-tuning the sound at the end of an effects pedal chain, for example. The Tone Job V2 has a noiseless, relay-based soft-touch footswitch. Audio signals do not pass through if the device is not supplied with power.
- Equalizer and tone enhancer with booster
- Active 3-band EQ
- up to +-20 dB boost/cut per band
- boosts post-EQ level up to 5x the input signal
- completely analog design
- True Bypass
- Bass and treble response dependent on the Mid setting
- Controls for level treble (2 kHz shelf), bass (500 Hz shelf) and mid (1 kHz bell resonance filter)
- Bypass footswitch
- noiseless relay-based soft-touch switching
- Status LED
- Metal housing
- 6.3 mm mono jack input and output
- Power supply via 9V battery or optional 9V - 18V mains adapter 2.1 mm x 5.5 mm barrel connector, polarity (-) inside
- Dimensions (L x W x H): 117 mm x 64 mm x 57 mm
- Power consumption 10 mA
- Hand-made in the USA
This text has been automatically translated and may contain errors.
EarthQuaker Devices Tone Job V2 - EQ / Boost
The EQD Tone Job is a well-equipped tone enhancement tool with EQ and booster, suitable for guitar, bass, synthesizer and more. The Tone Job pedal is equipped with controls for level, treble, mid and bass, with treble, mid and bass working actively, each with a +-20dB control range. The Level control is located behind the EQ and can raise the level by up to five times. The EQD Tone Job is ideal for fine-tuning the sound at the end of an effects pedal chain, for example. The Tone Job V2 has a noiseless, relay-based soft-touch footswitch. Audio signals do not pass through if the device is not supplied with power.
- Equalizer and tone enhancer with booster
- Active 3-band EQ
- up to +-20 dB boost/cut per band
- boosts post-EQ level up to 5x the input signal
- completely analog design
- True Bypass
- Bass and treble response dependent on the Mid setting
- Controls for level treble (2 kHz shelf), bass (500 Hz shelf) and mid (1 kHz bell resonance filter)
- Bypass footswitch
- noiseless relay-based soft-touch switching
- Status LED
- Metal housing
- 6.3 mm mono jack input and output
- Power supply via 9V battery or optional 9V - 18V mains adapter 2.1 mm x 5.5 mm barrel connector, polarity (-) inside
- Dimensions (L x W x H): 117 mm x 64 mm x 57 mm
- Power consumption 10 mA
- Hand-made in the USA
This text has been automatically translated and may contain errors.
| Safety and warning information | Die für das Produkt geltenden Sicherheits- und Warnhinweise sind in der Bedienungsanleitung des Produkts aufgeführt. |
|---|---|
| manufacturer information | Warwick GmbH & Co Music Equipment Gewerbepark 46 08258 Markneukirchen GERMANY info@warwick.de |
EarthQuaker Devices Tone Job V2 - EQ / Boost
The EQD Tone Job is a well-equipped tone enhancement tool with EQ and booster, suitable for guitar, bass, synthesizer and more. The Tone Job pedal is equipped with controls for level, treble, mid and bass, with treble, mid and bass working actively, each with a +-20dB control range. The Level control is located behind the EQ and can raise the level by up to five times. The EQD Tone Job is ideal for fine-tuning the sound at the end of an effects pedal chain, for example. The Tone Job V2 has a noiseless, relay-based soft-touch footswitch. Audio signals do not pass through if the device is not supplied with power.
- Equalizer and tone enhancer with booster
- Active 3-band EQ
- up to +-20 dB boost/cut per band
- boosts post-EQ level up to 5x the input signal
- completely analog design
- True Bypass
- Bass and treble response dependent on the Mid setting
- Controls for level treble (2 kHz shelf), bass (500 Hz shelf) and mid (1 kHz bell resonance filter)
- Bypass footswitch
- noiseless relay-based soft-touch switching
- Status LED
- Metal housing
- 6.3 mm mono jack input and output
- Power supply via 9V battery or optional 9V - 18V mains adapter 2.1 mm x 5.5 mm barrel connector, polarity (-) inside
- Dimensions (L x W x H): 117 mm x 64 mm x 57 mm
- Power consumption 10 mA
- Hand-made in the USA
This text has been automatically translated and may contain errors.
Product recommendations could not be loaded.