EarthQuaker Devices Sunn O))) Life Pedal V3

Sunn O))) Life Pedal V3 - Distortion - Boost - Octaver
The EarthQuaker Devices Sunn O))) Life Pedal V3 offers distortion, boost and an adjustable octave-up effect in one compact effects pedal. The 'Amplitude' section of the pedal is based on the classic 'White Face' distortion pedal, but the circuit has been expanded to include three selectable clipping modes. The first position (No Diode OpAmp Drive) offers a rich drive at maximum volume. The second position uses two silicon diodes and an LED in an asymmetrical clipping configuration and produces a slightly compressed, smooth crunch reminiscent of an overdriven amplifier. The third position uses two silicon diodes and produces the classic 'white face' sound. The octave-up section works completely analog and can be mixed continuously with the distortion via a control or an optional Expression pedal. The monophonic effect works most 'cleanly' with individual Noten above the 12th fret, which are played via the neck pickup. Chords produce a chaotic, 'clattering' sound. If you turn the octave control all the way up, the Sunn O))) Life Pedal V3 produces a dirty, angry fuzz sound reminiscent of the Super Fuzz. The 'Magnitude' section is a MOSFET booster that drives tube amps into saturation. The booster works completely clean and adds no distortion to the signal itself, but offers an extremely high output level to push the front end of the amp. The signal path is Octave > Distortion > Boost, and both sections can be used independently of each other.
- developed in collaboration with Sunn O))) to recreate the front-end sound of 'Life Metal' and drive tube amps into saturation
- 3 selectable clipping modes (Symmetrical Silicon / Asymmetrical Silicon and LED / No Diode OpAmp Drive)
- silent relay-based soft-touch footswitch functions as a toggle and momentary switch
- uses Flexi-Switch® technology developed by EQD
- True Bypass
- Controls: Magnitude, Octave, Clip, Distortion, Filter, Amplitude
- 3-way switch for the three clipping modes
- Magnitude footswitch (Boost on/off), Octave footswitch (Octave on/off), Amplitude footswitch (Distortion on/off)
- Status LEDs
- Metal housing
- 6.3 mm mono jack input/output
- 6.3 mm Expression pedal input to control the octave-up effect
- Power supply via optional 9V DC power supply, 2.1 x 5.5 mm barrel plug, polarity (-) inside
- Battery operation not supported
- Current consumption 15 mA
- Dimensions (L x W x H): 120 x 146 x 38 mm
- Weight 542 g
- Made in USA
This text has been automatically translated and may contain errors.
| Safety and warning information | Die für das Produkt geltenden Sicherheits- und Warnhinweise sind in der Bedienungsanleitung des Produkts aufgeführt. |
|---|---|
| manufacturer information | Warwick GmbH & Co Music Equipment Gewerbepark 46 08258 Markneukirchen GERMANY info@warwick.de |
Sunn O))) Life Pedal V3 - Distortion - Boost - Octaver
The EarthQuaker Devices Sunn O))) Life Pedal V3 offers distortion, boost and an adjustable octave-up effect in one compact effects pedal. The 'Amplitude' section of the pedal is based on the classic 'White Face' distortion pedal, but the circuit has been expanded to include three selectable clipping modes. The first position (No Diode OpAmp Drive) offers a rich drive at maximum volume. The second position uses two silicon diodes and an LED in an asymmetrical clipping configuration and produces a slightly compressed, smooth crunch reminiscent of an overdriven amplifier. The third position uses two silicon diodes and produces the classic 'white face' sound. The octave-up section works completely analog and can be mixed continuously with the distortion via a control or an optional Expression pedal. The monophonic effect works most 'cleanly' with individual Noten above the 12th fret, which are played via the neck pickup. Chords produce a chaotic, 'clattering' sound. If you turn the octave control all the way up, the Sunn O))) Life Pedal V3 produces a dirty, angry fuzz sound reminiscent of the Super Fuzz. The 'Magnitude' section is a MOSFET booster that drives tube amps into saturation. The booster works completely clean and adds no distortion to the signal itself, but offers an extremely high output level to push the front end of the amp. The signal path is Octave > Distortion > Boost, and both sections can be used independently of each other.
- developed in collaboration with Sunn O))) to recreate the front-end sound of 'Life Metal' and drive tube amps into saturation
- 3 selectable clipping modes (Symmetrical Silicon / Asymmetrical Silicon and LED / No Diode OpAmp Drive)
- silent relay-based soft-touch footswitch functions as a toggle and momentary switch
- uses Flexi-Switch® technology developed by EQD
- True Bypass
- Controls: Magnitude, Octave, Clip, Distortion, Filter, Amplitude
- 3-way switch for the three clipping modes
- Magnitude footswitch (Boost on/off), Octave footswitch (Octave on/off), Amplitude footswitch (Distortion on/off)
- Status LEDs
- Metal housing
- 6.3 mm mono jack input/output
- 6.3 mm Expression pedal input to control the octave-up effect
- Power supply via optional 9V DC power supply, 2.1 x 5.5 mm barrel plug, polarity (-) inside
- Battery operation not supported
- Current consumption 15 mA
- Dimensions (L x W x H): 120 x 146 x 38 mm
- Weight 542 g
- Made in USA
This text has been automatically translated and may contain errors.
Sunn O))) Life Pedal V3 - Distortion - Boost - Octaver
The EarthQuaker Devices Sunn O))) Life Pedal V3 offers distortion, boost and an adjustable octave-up effect in one compact effects pedal. The 'Amplitude' section of the pedal is based on the classic 'White Face' distortion pedal, but the circuit has been expanded to include three selectable clipping modes. The first position (No Diode OpAmp Drive) offers a rich drive at maximum volume. The second position uses two silicon diodes and an LED in an asymmetrical clipping configuration and produces a slightly compressed, smooth crunch reminiscent of an overdriven amplifier. The third position uses two silicon diodes and produces the classic 'white face' sound. The octave-up section works completely analog and can be mixed continuously with the distortion via a control or an optional Expression pedal. The monophonic effect works most 'cleanly' with individual Noten above the 12th fret, which are played via the neck pickup. Chords produce a chaotic, 'clattering' sound. If you turn the octave control all the way up, the Sunn O))) Life Pedal V3 produces a dirty, angry fuzz sound reminiscent of the Super Fuzz. The 'Magnitude' section is a MOSFET booster that drives tube amps into saturation. The booster works completely clean and adds no distortion to the signal itself, but offers an extremely high output level to push the front end of the amp. The signal path is Octave > Distortion > Boost, and both sections can be used independently of each other.
- developed in collaboration with Sunn O))) to recreate the front-end sound of 'Life Metal' and drive tube amps into saturation
- 3 selectable clipping modes (Symmetrical Silicon / Asymmetrical Silicon and LED / No Diode OpAmp Drive)
- silent relay-based soft-touch footswitch functions as a toggle and momentary switch
- uses Flexi-Switch® technology developed by EQD
- True Bypass
- Controls: Magnitude, Octave, Clip, Distortion, Filter, Amplitude
- 3-way switch for the three clipping modes
- Magnitude footswitch (Boost on/off), Octave footswitch (Octave on/off), Amplitude footswitch (Distortion on/off)
- Status LEDs
- Metal housing
- 6.3 mm mono jack input/output
- 6.3 mm Expression pedal input to control the octave-up effect
- Power supply via optional 9V DC power supply, 2.1 x 5.5 mm barrel plug, polarity (-) inside
- Battery operation not supported
- Current consumption 15 mA
- Dimensions (L x W x H): 120 x 146 x 38 mm
- Weight 542 g
- Made in USA
This text has been automatically translated and may contain errors.
| Safety and warning information | Die für das Produkt geltenden Sicherheits- und Warnhinweise sind in der Bedienungsanleitung des Produkts aufgeführt. |
|---|---|
| manufacturer information | Warwick GmbH & Co Music Equipment Gewerbepark 46 08258 Markneukirchen GERMANY info@warwick.de |
Sunn O))) Life Pedal V3 - Distortion - Boost - Octaver
The EarthQuaker Devices Sunn O))) Life Pedal V3 offers distortion, boost and an adjustable octave-up effect in one compact effects pedal. The 'Amplitude' section of the pedal is based on the classic 'White Face' distortion pedal, but the circuit has been expanded to include three selectable clipping modes. The first position (No Diode OpAmp Drive) offers a rich drive at maximum volume. The second position uses two silicon diodes and an LED in an asymmetrical clipping configuration and produces a slightly compressed, smooth crunch reminiscent of an overdriven amplifier. The third position uses two silicon diodes and produces the classic 'white face' sound. The octave-up section works completely analog and can be mixed continuously with the distortion via a control or an optional Expression pedal. The monophonic effect works most 'cleanly' with individual Noten above the 12th fret, which are played via the neck pickup. Chords produce a chaotic, 'clattering' sound. If you turn the octave control all the way up, the Sunn O))) Life Pedal V3 produces a dirty, angry fuzz sound reminiscent of the Super Fuzz. The 'Magnitude' section is a MOSFET booster that drives tube amps into saturation. The booster works completely clean and adds no distortion to the signal itself, but offers an extremely high output level to push the front end of the amp. The signal path is Octave > Distortion > Boost, and both sections can be used independently of each other.
- developed in collaboration with Sunn O))) to recreate the front-end sound of 'Life Metal' and drive tube amps into saturation
- 3 selectable clipping modes (Symmetrical Silicon / Asymmetrical Silicon and LED / No Diode OpAmp Drive)
- silent relay-based soft-touch footswitch functions as a toggle and momentary switch
- uses Flexi-Switch® technology developed by EQD
- True Bypass
- Controls: Magnitude, Octave, Clip, Distortion, Filter, Amplitude
- 3-way switch for the three clipping modes
- Magnitude footswitch (Boost on/off), Octave footswitch (Octave on/off), Amplitude footswitch (Distortion on/off)
- Status LEDs
- Metal housing
- 6.3 mm mono jack input/output
- 6.3 mm Expression pedal input to control the octave-up effect
- Power supply via optional 9V DC power supply, 2.1 x 5.5 mm barrel plug, polarity (-) inside
- Battery operation not supported
- Current consumption 15 mA
- Dimensions (L x W x H): 120 x 146 x 38 mm
- Weight 542 g
- Made in USA
This text has been automatically translated and may contain errors.
Product recommendations could not be loaded.
