EarthQuaker Devices Hummingbird V4

EarthQuaker Devices Hummingbird V4 - Repeat Percussions
The EQD Hummingbird V3 is a repeat percussion tremolo and therefore a specialist for hard tremolo effects. The Hummingbird V3 uses a sawtooth waveform for modulation, similar to the vintage tremolo in old Valco and Vox amps. The effect spectrum of the Hummingbird V3 ranges from a shimmering 50s tremolo to synthetic-sounding, choppy sounds. At maximum speed, the Hummingbird V3 almost sounds like a ring modulator. The pedal has three modes: slow, mid-tempo and fast. With the effect volume turned down, the Hummingbird V3 can also be used as a high-quality JFET clean booster. The possibilities of the pedal are extended by a Expression pedal connection. In addition, the footswitch functions as a standard latching switch as well as a momentary switch, so that you can only use the effect for as long as you need it. The Hummingbird V3 is equipped with a true bypass and a noiseless relay-based soft-touch circuit and is handcrafted in Ohio/USA.
- tremolo effects pedal
- For hard, choppy tremolo effects
- Uses sawtooth waveform for modulation
- Completely analog design
- Footswitch functions as latching and momentary switch
- 3 modes Slow, Mid-Tempo, Fast
- Can also be used as a JFET clean booster
- True bypass
- Controls for level, depth and rate
- Bypass footswitch
- noiseless relay-based soft-touch switching
- Status LED
- Metal housing
- Input and output 6.3 mm mono jack and Expression pedal connection
- Power supply via optional 9V DC power supply 2.1 mm x 5.5 mm barrel connector, polarity (-) inside
- Battery operation not supported
- Dimensions (L x W x H) 117 mm x 64 mm x 57 mm
- Power consumption 10 mA
- hand-made in USA
This text has been automatically translated and may contain errors.
| Safety and warning information | Die für das Produkt geltenden Sicherheits- und Warnhinweise sind in der Bedienungsanleitung des Produkts aufgeführt. |
|---|---|
| manufacturer information | Warwick GmbH & Co Music Equipment Gewerbepark 46 08258 Markneukirchen GERMANY info@warwick.de |
EarthQuaker Devices Hummingbird V4 - Repeat Percussions
The EQD Hummingbird V3 is a repeat percussion tremolo and therefore a specialist for hard tremolo effects. The Hummingbird V3 uses a sawtooth waveform for modulation, similar to the vintage tremolo in old Valco and Vox amps. The effect spectrum of the Hummingbird V3 ranges from a shimmering 50s tremolo to synthetic-sounding, choppy sounds. At maximum speed, the Hummingbird V3 almost sounds like a ring modulator. The pedal has three modes: slow, mid-tempo and fast. With the effect volume turned down, the Hummingbird V3 can also be used as a high-quality JFET clean booster. The possibilities of the pedal are extended by a Expression pedal connection. In addition, the footswitch functions as a standard latching switch as well as a momentary switch, so that you can only use the effect for as long as you need it. The Hummingbird V3 is equipped with a true bypass and a noiseless relay-based soft-touch circuit and is handcrafted in Ohio/USA.
- tremolo effects pedal
- For hard, choppy tremolo effects
- Uses sawtooth waveform for modulation
- Completely analog design
- Footswitch functions as latching and momentary switch
- 3 modes Slow, Mid-Tempo, Fast
- Can also be used as a JFET clean booster
- True bypass
- Controls for level, depth and rate
- Bypass footswitch
- noiseless relay-based soft-touch switching
- Status LED
- Metal housing
- Input and output 6.3 mm mono jack and Expression pedal connection
- Power supply via optional 9V DC power supply 2.1 mm x 5.5 mm barrel connector, polarity (-) inside
- Battery operation not supported
- Dimensions (L x W x H) 117 mm x 64 mm x 57 mm
- Power consumption 10 mA
- hand-made in USA
This text has been automatically translated and may contain errors.
EarthQuaker Devices Hummingbird V4 - Repeat Percussions
The EQD Hummingbird V3 is a repeat percussion tremolo and therefore a specialist for hard tremolo effects. The Hummingbird V3 uses a sawtooth waveform for modulation, similar to the vintage tremolo in old Valco and Vox amps. The effect spectrum of the Hummingbird V3 ranges from a shimmering 50s tremolo to synthetic-sounding, choppy sounds. At maximum speed, the Hummingbird V3 almost sounds like a ring modulator. The pedal has three modes: slow, mid-tempo and fast. With the effect volume turned down, the Hummingbird V3 can also be used as a high-quality JFET clean booster. The possibilities of the pedal are extended by a Expression pedal connection. In addition, the footswitch functions as a standard latching switch as well as a momentary switch, so that you can only use the effect for as long as you need it. The Hummingbird V3 is equipped with a true bypass and a noiseless relay-based soft-touch circuit and is handcrafted in Ohio/USA.
- tremolo effects pedal
- For hard, choppy tremolo effects
- Uses sawtooth waveform for modulation
- Completely analog design
- Footswitch functions as latching and momentary switch
- 3 modes Slow, Mid-Tempo, Fast
- Can also be used as a JFET clean booster
- True bypass
- Controls for level, depth and rate
- Bypass footswitch
- noiseless relay-based soft-touch switching
- Status LED
- Metal housing
- Input and output 6.3 mm mono jack and Expression pedal connection
- Power supply via optional 9V DC power supply 2.1 mm x 5.5 mm barrel connector, polarity (-) inside
- Battery operation not supported
- Dimensions (L x W x H) 117 mm x 64 mm x 57 mm
- Power consumption 10 mA
- hand-made in USA
This text has been automatically translated and may contain errors.
| Safety and warning information | Die für das Produkt geltenden Sicherheits- und Warnhinweise sind in der Bedienungsanleitung des Produkts aufgeführt. |
|---|---|
| manufacturer information | Warwick GmbH & Co Music Equipment Gewerbepark 46 08258 Markneukirchen GERMANY info@warwick.de |
EarthQuaker Devices Hummingbird V4 - Repeat Percussions
The EQD Hummingbird V3 is a repeat percussion tremolo and therefore a specialist for hard tremolo effects. The Hummingbird V3 uses a sawtooth waveform for modulation, similar to the vintage tremolo in old Valco and Vox amps. The effect spectrum of the Hummingbird V3 ranges from a shimmering 50s tremolo to synthetic-sounding, choppy sounds. At maximum speed, the Hummingbird V3 almost sounds like a ring modulator. The pedal has three modes: slow, mid-tempo and fast. With the effect volume turned down, the Hummingbird V3 can also be used as a high-quality JFET clean booster. The possibilities of the pedal are extended by a Expression pedal connection. In addition, the footswitch functions as a standard latching switch as well as a momentary switch, so that you can only use the effect for as long as you need it. The Hummingbird V3 is equipped with a true bypass and a noiseless relay-based soft-touch circuit and is handcrafted in Ohio/USA.
- tremolo effects pedal
- For hard, choppy tremolo effects
- Uses sawtooth waveform for modulation
- Completely analog design
- Footswitch functions as latching and momentary switch
- 3 modes Slow, Mid-Tempo, Fast
- Can also be used as a JFET clean booster
- True bypass
- Controls for level, depth and rate
- Bypass footswitch
- noiseless relay-based soft-touch switching
- Status LED
- Metal housing
- Input and output 6.3 mm mono jack and Expression pedal connection
- Power supply via optional 9V DC power supply 2.1 mm x 5.5 mm barrel connector, polarity (-) inside
- Battery operation not supported
- Dimensions (L x W x H) 117 mm x 64 mm x 57 mm
- Power consumption 10 mA
- hand-made in USA
This text has been automatically translated and may contain errors.
Product recommendations could not be loaded.
